Instruction Manual

Sygic GPS navigation
http://www.sygic.com/manuals/manual_en.html#useful[4/05/2009 10:36:45 AM]
1) COM port - set your COM port depending on your hardware configuration, if you don't know which COM port to
use, contact your hardware manufacturer or local hardware dealer. COM port depends on your hardware device and
not on navigation software.
2) Baud rate - configure your baud rate (transfer speed), default baud rates are 4800 or 9600. If you have
problem with configuring your baud rate you should contact your hardware manufacturer or local hardware dealer.
Just as with COM port, Baud rate depends on your hardware device and doesn't have anything to do with navigation
software.
3) Turn GPS module On/Off - tap this button for activating GPS module with configured COM port and Baud
rate settings.
4) Synchronize time - tap this button if you wish to change your hardware time for time provided by GPS
module.
World clock
You can easily preset three different cities and their current time. Choose from more than 20 different cities. To set
the clock, just tap on the clock icon and then just manually choose your desired city. Use the same technique to set
next two cities.
Settings