User guide Sygic Fleet Navigation 2D software © 2014 Sygic, a.s. All rights reserved.
......................................................................................................... 1 I. Prologue ..................................................................................1 II. Getting Started ......................................................................2 Compatibility ................................................................................. 2 The Navigation Screen ................................................................. 3 Turn by Turn Navigation ....
VII. Traffic ................................................................................. 36 Logging in ..................................................................................... 36 Traffic menu ................................................................................ 37 Re-compute a route .................................................................... 37 VIII. Extras ................................................................................
I. Prologue Dear Customer, Thank you for choosing Sygic navigation. Sygic Fleet navigation software (version 2D) is a complete wellestablished navigation system with high quality and stability, accurate search and precise route computing. It is an offline turnby-turn navigation with rich set of features and easy to use driver friendly user interface. We wish you a pleasant and safe journey.
II. Getting Started Sygic Fleet navigation is offline navigation software and does not require online connection to operate. Online connection is only necessary for optional add-on services such as Traffic information and crowd-sourced Police trap alerts. take precedence over indications of this navigation software. Please take reasonable care and keep your own sound judgment while following instructions.
Compatibility Minimum requirements are: Processor frequency: 600 MHz Device memory (RAM): 128 MB Supported platforms: WindowsCE 6.0, Android 2.3.x and higher Screen resolution: 240x240 px and higher Please note: Custom ROM is not supported as we cannot guarantee compatibility with other than stock ROM from the manufacturer. Please note, that some menu items might not be available in your package. Their availability depends on configuration of the product you purchased.
The Navigation Screen For further functions, enter the Main menu by tapping the map area on the Navigation Screen. On start-up, the application opens with the Navigation Screen, showing your position as a blue arrow. You can zoom in and out of the map by tapping the + and – buttons in the top corners of the screen.
You can scroll between the menu pages by tapping the arrow buttons at the bottom of the screen or by sliding a finger across the screen. Main menu > Navigate to… > Address or Zip code. Next, you will be asked to select a Country a City, Street and House number or Street crossing. Enter the required names and numbers. Alternatively, just enter the first few letters of the city/street name to see a list of similar names.
The list also features explanatory icons left to the city/street name: City Capital city Village City center Street Street crossing Before routing to your destination, you can display the Select the desired city/street from exact location of the address on the list. map by tapping “On Map”. When finished, a Confirmation Screen pops up showing the address entered.
You can also store the location as a favourite destination by tapping on “Add to favourites” (see section To set the address shown as your destination, tap the “Route Me!” button at the bottom right of the screen. Navigating to Favourite Destinations”). If your device can determine your If you would rather be directed to current position, your route will be a parking nearby, tap “Parking” calculated immediately from that and select from the list shown. positon.
Acquiring GPS Position”). When route calculation is complete, the entire route is Last valid position Your route will be calculated displayed on the map (in blue) with total distance, estimated from your last known time of arrival (ETA), time left to position (i.e. where you were just before the device destination and route calculation method (Fastest, Economic, lost GPS signal). Shortest, Pedestrian, Bicycle) Select from map shown below the map.
To accept the route and start turn by turn navigation, tap “Done”. For further information on the route, tap “Details”. In Detail view the icons highlighted in blue indicate specific types of roads included in the route. To avoid a specific road type (e.g. Highways), tap the blue highlighted button.
Turn by Turn Navigation The Navigation Screen will show the map of your surrounding area with the calculated route highlighted in blue. As you approach a junction, further directions are displayed to indicate which road to take.
Acquiring GPS Position If there is no GPS signal, the screen becomes grey. This can happen under any of the following conditions: ■ The device is in a tunnel or at a location where signals from the GPS satellites are obstructed by buildings, trees, electric cables or other objects. ■ Device system settings or Product Settings are set incorrectly. The information below is not available on Android devices.
become green. Tap the signal bars or select Main menu > GPS to see more detailed GPS information. (If not visible in the menu, you can access this setting by tapping Signal Bars) You will see GPS status information. By tapping on Hardware in bottom right part of the screen you can get to menu enabling you to set your GPS and TMC hardware if available on your device. The settings are described in Settings section. Once GPS signal is regained turn by turn navigation resumes automatically.
III. Navigation with Truck Attributes Truck navigation is not available on all the devices. It’s presence depends on the product you purchased. The truck attributes of the map allow setting up the dimensions of the truck and then the route is calculated avoiding the routes, where the truck is not allowed to drive. To set up the truck dimensions, enter the Main menu , select Settings and then select Truck settings.
The truck attributes of the roads are also displayed during the navigation.
IV. Planning the Route Navigating to a Point of Interest In addition to the road network, the map also stores the details of thousands of Points of Interest (POIs) such as gas stations, restaurants, hotels, tourist attractions and other facilities. To set a POI as your destination, first select Main menu > Navigate to… > Point of Interest 14 Next, define the area where you want to search for the POI.
Searching POIs POIs are arranged in groups (such as Food, Hotel or Motel etc.) to help find a facility even when you do not know its name or address. NOTE: The distances shown in the list are relative to the search location. Scroll down the list and select your POI by tapping its name. Once the search area is selected, a list of the POI groups is displayed. Tap on the POI group and you will see the list of all POIs that are nearby.
Create new custom categories by tapping on New. Edit POI name Delete POI Delete POI category To set the selected POI as your destination, tap the “Route Me!” button. Managing POIs Manage POIs in Main menu > Show/hide POIs Select the POI categories, which should be displayed on map. Warn when near POI Select a POI category to set a warning for. Set the distance and choose a sound for the warning. Choose whether to warn only if the POI is on the route. Manage POI Add POI Select a destination of the POI.
Navigating Home To start using this feature, you need to set your home location first. Select Main menu > Settings > Set home location and enter your home address. Once your home address is stored, you can navigate home by simply selecting Main menu > Navigate to… > Home Navigating to Recent Destinations Sygic 2D Navigaiton keeps track of your recent destinations, making it easy to return to a previously set location.
Main menu> Navigate to… > History and start navigation by selecting a previous destination from the list shown. Navigating to Favourite Destinations To view a list of your Favourite destinations, select Main menu > Navigate to… > Favourite and start navigation by selecting a Favorite destination from the list shown.
Select the desired Favorite destination by tapping it and then select your next option from the Confirmation Screen.
Navigating to point on map To navigate to point on map select Main menu > Navigate to > Point on Map > Select point on map > Done Select point on map > Navigate there > Navigating to last valid position To navigate to your last valid position, where you have been receiving GPS signal, select Main menu > > Navigate to Last valid position or select Main menu > Map > 20 User Guide
Navigating to a GPS position To navigate to a GPS position, select Main menu > > Navigate to Enter GPS position Enter the values for latitude and longitude and tap on Enter.
V. Altering the Route Route Menu You can access detailed information about the calculated route from the Route menu. Select To get a schematic overview of the route, select Show route summary > Details Main menu > Route The icons highlighted in blue indicate specific types of roads included in the route.
To avoid a specific road type (e.g. Highways), tap the blue highlighted button. To see the entire route on the map, select Show on map To get a detailed list of junctions and directions along the route, select Sygic 2D Navigation Show route instructions Click on the particular instructions to display the image of them.
To see the same junctions as a series of images, select Show route as images Show route demo To see the calculated route as if you were driving along (fly over mode) select 24 User Guide
Modifying the Route To modify an existing route, first open the Alternative route menu: Main menu > Route > Alternative route To calculate a detour (e.g. because the road ahead is closed), select Avoid next... If you wish to avoid traffic delays which might be on your route, select Avoid traffic delays If you wish to travel through a certain place on your trip, select way, as setting the destination in chapter “Planning the Route”.
Map Browsing Mode You can easily check and plan/modify your route in Map Browsing Mode. Select Main menu > Map For map display options and additional functions tap the “Options” button and select one of the following items. Find... You can find a position by using one of the options described in chapter IV. Planning the Route. Show current position Show entire route Show city Shows entire city on map screen. Drag the map by sliding your finger across the screen. Tap the map to select specific location.
Show/Hide POIs... You can select, which types of POI types are displayed when browsing the map. To plan/modify your route, tap on a location on the map, then tap the button marked as “ ” to choose what you want to do with the selected point. Navigate there Sets the location as destination. The previously selected route will be deleted. Travel via Adds the location as a new waypoint to your existing route between start and finish.
Multi-stop route planning If you have added some waypoints to your route via Map or Alternative route, you can edit them in Itinerary. It is also possible to optimize waypoints along the route, plan a new route or store it for future use. To edit the current route, select Main menu > Route > Itinerary and select the [Current route] to see the list of waypoints. 28 The itinerary shows the starting point (marked with ), the numbered waypoints and the final destination (marked with ).
Waypoint options Tapping on any waypoint in the itinerary brings up the following list of options: Set as visited Stops navigating to the selected waypoint and recalculates the route to the next waypoint in the itinerary. Set as finish point Puts the waypoint to the end and moves others upwards in the itinerary. Set as via point Changes the final destination to an intermediate waypoint. Set as start Stores the selected waypoint as the starting Sygic 2D Navigation point of the route.
Optimize itinerary Optimizes the waypoint sequence in the itinerary. Delete itinerary Deletes the itinerary. Save itinerary Saves the itinerary for future use.
VI. Settings IMPORTANT: Menu items marked with * are not available in all devices. To change factory settings, select Main menu Settings Set the preference how to scroll within lists and menus. Set Day/Night colors Choose between day and night colours or set them to switch autmatically. Disable sounds NOTE: Icons always display the setting that will be activated when they are tapped. E.g. means that voice output and sounds are currently enabled, and tapping this button will disable the sounds.
status button or signal icon in the middle of bottom panel connect or disconnect to internet. To be able to connect you have to login in Online services section. In Options adapt your online settings: enable data roaming, ask before going online, reset counters. Online services* Tap on Fill login info to login and enable online services.
avoiding congestion zones – always ask, always avoid, do not avoid. Planning preferences Set the routing algorithm: Fastest, Economic, Shortest, Pedestrian, Bicycle. Specify your planning preferences – choose what elements to avoid: motorways, ferries, toll roads, unpaved roads. Toll charge settings Set the preference of paid road segments: avoid them, do not avoid them, or always ask.
portrait). Keyboard settings Choose the keyboard layouts to use. You can switch between preferred keyboard layouts using button, that is available in every keyboard. Regional settings Set preffered format for distances (kilometers, miles/yards, miles/feet), time, lattitude and longitude. Set language - language of user interface. Set voice - language of voice instructions. 34 Set home location Gps Hardware* Settings of GPS and TMC hardware if available on your device.
Sygic support. Turn GPS module On / Off Synchronize time Autodetect Autodetects your hardware’s COM port and Baud rate values Wizard Autodetect or manual setting of GPS and TMC COM ports and baud rates. Restore default settings Main menu > Speed camera Set speedcamera warnings: enable radar warnings, enable warning sound, show radars on map. Set the radar limit for inside and outside builtup areas. Backlight Set the backlight intensity for day and night mode.
VII. Traffic Traffic is not available on all the devices. It is an online service and requires internet connection. The availability depends on product you bought. If you wish to buy traffic aditionally, go to www.sygic.com. Traffic service is provided via RDS (RDS TMC) or internet (Online TMC). RDS TMC is preconfigurated in your package and no login is needed. For Online TMC please follow the login instructions below. Insert your login data and tap on Fill login info. Make sure, that Traffic is ticked.
Traffic menu Select Main menu > Re-computes a route Traffic Show all incidents All the incidents around you will be displayed. Click Avoid all to re-compute a route avoiding all the incidents. When clicking on an incident, it will be displayed on a map. Click Avoid to avoid this particular incident. Incidents on route Only the incidents on computed route are displayed. They can be displayed and avoided the same way as in Show all incidents menu.
VIII. Extras To go to extras, select Main menu > Extras World clock 3 clocks are displayed. Tap on clock to select a time-zone and a city to be displayed. Tap Convert to switch to Unit Convertor. Unit Convertor Calculator 38 Tap on Conversion row to select the units category to convert – currency, length, area, volume, mass, pressure, power, energy, temperature.
Country info Tap More to get more country information. Select a country from the list and tap it. The basic information will be displayed.
Disclaimer The information contained in this document is the property of Sygic a.s. and may be used only for the purposes of operating and supporting the relevant software created by Sygic a.s. Sygic a.s. reserves all rights concerning the information contained herein. This document or any part thereof may not be reproduced, distributed, or translated into other languages in any way or form except with the written approval of Sygic a.s. This document is provided to the user on an ‘as is’ basis.
