Data Sheet

Quick Start

This guide aims to explain the use of TransducerM, a 9 Degree-of-Freedom attitude and heading reference system (AHRS), its

development kit and accompanying GUI software, ImuAssistant. It will guide you through installing the software, connecting

hardware, navigating GUI and understanding basic parts of it.

Prepare

Completing this Quick Start guide will require the following items:

• PC running Windows 7/8/8.1/10.

• ImuAssistant software (ImuAssistant_Setup_Win32_Vx-x-x.zip)

• USB-to-Serial TTL converter (or other means of interfacing serial device using TTL logic from PC)

• TransducerM PCBA/Module

Install GUI Configuration Software

TransducerM comes with a graphical user interface software – ImuAssistant – for configuration and data visualization purpose.

Use the latest version of the software installer that comes with this document.

Run the file “ImuAssistant_Setup_Win32_Vx-x-x.exe” and follow the instructions from the installer.

After the installation has completed, run GUI software. You should see the screen similar to the one below if installation was

successful.

Figure 1: Software installer

Figure 2: Installer icon