Data Sheet

Click the 'Stop & Save' button when the data recording is finished. This will make ImuAssistant flush unsaved data in the

volatile memory and write into files located in the hard-drive of your computer and then close the files. The data recorder panel

shows 'Files saved successfully' shortly after, as demonstrated in Figure 36, which indicates you are safe to close the

ImuAssistant without losing any data.

The log data is saved in the file path as specified in section 'Configure Settings and Start to Record' on page 20.

Figure 37 shows example data log files when RawData and Roll/Pitch/Yaw data types are selected for recording.

Figure 36: Data recorder step 3 - files saved

successfully

Figure 37: Data recorder - example of the recorded data files