Data Sheet

X-Y Display

X-Y Display plots calibrated RAW sensor data from multiple axes of Accelerometer and Magnetometer into a single 2D plot

(one per instrument). For it to work, it is necessary to have the ‘Raw data’ output enabled, as shown in Figure 31. The red

curve indicates X-Axis data, green for Y-Axis and blue for Z-Axis.

Save the Setting

Once you are satisfied with the configurations, click the ‘Save Settings’ button as shown in Figure 8 section number 1. This

will make the settings permanent by saving the configurations into the flash inside the TransducerM.

Please also refer to the 'Save Setting' section on page 9.

Export Communication Library

To embed the TransducerM into your own system, you need a communication

library installed that talks to the module. The library is provided by SYD

Dynamics in the form of C/C++ in source code which only uses general features of

the programming language, meaning it can be ported and deployed into your target

system easily.

To acquire the communication library, simply select the library type and click

‘Generate Code’ as shown in Figure 32, or extract the downloaded zip file comes

together with this document.

Please refer to the section 'Use SYD Dynamics Communication Library' on

page 22 for instructions on how to use the communication library.

Figure 31: X-Y display output configuration

Figure 30: RAW data ‘X-Y Display’ visualization

Figure 32: Save and Export