Data Sheet

In-depth Description

Before going through this section, please make sure that you have also read the previous sections since some basic usage

instructions are only available there.

TransducerM – Node ID, Firmware Version, UUID

When your device is discovered and made visible in the list, you

can click the arrow (Figure 18, red square) left from the ‘Node

ID’ in order to get more information about this particular device.

Here you can firstly see ‘Node ID’, which is a shortened unique

ID of the device on current port (unlike ‘UUID’). To the right of

it, there’s a device name, which allows for giving a device a

more user-friendly label (up to 12 characters) that can be used

when working with bigger networks of TransducerM.

Both properties (‘Node ID’ and ‘Name’) are customizable and

can be changed by clicking the property and then

button placed above the list or slow-double-click the property

itself.

In the next two lines, you can see the ‘UUID’ of the node, a

specific set of characters unique to every device; and ‘Firmware’

version currently running inside the TransducerM.

ImuAssistant – Version Number

To check the version number of ImuAssistant GUI software, click the '…' button located on the bottom-left corner of

ImuAssistant, as shown in Figure 19.

A pop-up window will show up. Figure 20 is an example, saying ImuAssistant version number is V3.8.1.

Figure 18: Device information

Figure 19: ImuAssistant about button

Figure 20: ImuAssistant version number