Installation Instructions

Safety and environmental instructions Page 8/24

Installation and commissioning instructions

Make sure that the probe used with the device matches the measured and used quantities.

Refer to the individual technical instructions for each probe. In case of doubt, immediately

contact our technical service or your authorized installer.

Probes are sensitive and have consumable parts. They must be monitored, maintained and

calibrated regularly using specific reference products not supplied with the equipment. In the

event of a defect, a potential risk of excess chemical injection may be identified. In case of

doubt, a maintenance contract must be made with your installer or failing that with your

technical services. Contact your authorised installer or our sales department for more

information.

4) Probe rating plate identification Cu/Au CAA320X

Manufacturer’s label

Identification of the manufacturer

Model of the product

CE approved

Measuring range

Conformity with the FCC part 15 Class B

Range of current

FCC ID

Reference of the product

Serial number

Particular risks. Read the manual

QR code

Reference of the product

Measuring range

CAA3205 Chlorine Cu/Au 0 – 2 ppm

CAA3206 Chlorine Cu/Au 0 – 10 ppm