Programming Instructions

Programming screen « USER » Page 63/74
General programming instructions
f) Menu « General configuration » - « ALARMS » [0111]
This alarm selection is used to activate the “Alarm beep” and to activate the alarm color of the LED. The
system regroups the alarms of all activate parameters before selecting the ones checked below.
 Sensor faults
- Selects sensor faults (Unstable & Out of order sensors). Here this option is (Active).
 Alarm thresholds
- Selects parameter alarm thresholds (Low Alarm &High Alarm). Here this option is (Active).
 Tank level
- Selects tank level(s) parameters. Here this option is (Active).
 Overdosing
- Selects paramters overdosage alarms. Here this option is (Active).
General user settings
Screen
Sounds
Colors
Indicators
Button
Select general alarms
Sensor faults
Alarm thresholds
Tank levels
Alarms
Restore
Overdosing