Programming Instructions

Programming screen « INSTALLATION » Page 59/74
 Delays time before activation 15 minute(s)
- Enter the delay value before screen protection activation. Here the delay is (15) minutes.
Press to open the numeric keyboard and enter the desired value.
 Back-light level
- Enter back-light value during screen protection. Here the value is (20) %.
Press to open the numeric keyboard and enter the desired value.
b) Menu « General configuration » - « SOUNDS » [0111]
 Beep when touching the screen
- You must check this option to enable beep management et each valid tap on the screen. Here the
option is (
Active).
 Audible beep in alarm
- You must check this option to enable the management of a beep every second in case of a “general”
alarm. Here the option is (
Disabled).
 Sound adjustment
- You can change the sound rendering of each beep. By pressing the beep setting icon, you can change
the beep frequency and its duration.
Move the cursors by remaining pressed to change the frequency and duration values.
General user settings
Screen
Sounds
Colors
Indicators
Button
Alarms
Restore
Beep when touching the screen
Audible beep in alarm