Programming Instructions

Programming screen « USER » Page 58/74
General programming instructions
VII. Programming screen « USER » [0011]
« USER » menu will allow you to access the settings of the graphical interface.
Press to open the following screen.
Menu « UTILISATEUR »
1) Menu « User » - « GENERAL CONFIGURATION » [0111]
« GENERAL CONFIGURATION » menu will allow you to access the audio and visual configuration of
the graphical interface.
Press to open following screen.
a) Menu « General configuration » - « SCREEN » [0111]
 Back-light
- Use cursor to adjust the back-light level as desired.
 Activate screen protection
- You must check this option to enable screen protection management. Without pressing the screen
during the time entered, the back-light level will decrease to the set value. Here the management is
(
Active).
Menu
USER
User menu
GENERAL
CONFIGURATION
DISPLAY
DATE & TIME LANGUAGE
USB
INPUTS TEST OUTPUTS TEST
INFO
GENERAL
CONFIGURATION
General user settings
Screen
Sounds
Colors
Indicatros
Button
Alarms
Restore
Bakc-light
Activate screen protection
Delays time before activation 15
minute(s)
Back-light level 20 %