Programming Instructions

Programming screen « INSTALLATION » Page 55/74
 E05 Volume AI4
- Parameter identification, we find the parameter number identification (E05) ; type (Volume) and
associated sensor input (
AI4).
 Dosing stop threshold OFF
- Enter the low tank level which the dosage of the parameter conditioned by this tank level will be cut.
Here the threshold is disabled, current value (
OFF), dosages will not be cut by the tank level.
Press to open the numeric keyboard and enter the desired value.
Save:
- When a change is made, the “SAVE” button appears (floppy icon), you must save your configuration
by pressing it.
b) « Sensors & parameters » version
This version is only available if the installation option “Condition the tank bottom volumes only to the
parameter” is disabled.
In the example above the pH parameter has a volume sensor affected in packaging. The threshold setting of
the volume control will be specific to the pH parameter.
The screen shows the parameters & “volume” parameters that are configured. You can, by pressing and active
parameter, configure the volumes.
 See previous page for volume threshold setting
Tank level threshold settings
E05 Volume AI4
Dosing stop threshold OFF l
Tank level settings 4…20mA
Volume settings
pH Free chlorine
Volume measurement
Temperature
Parameters with assigned volume sensor