Programming Instructions

Programming screen « INSTALLATION » Page 52/74
5) Menu « Settings » - « FLOWRATE » [0521]
« FLOWRATE » menu will allow you to adjust the low flow threshold as well as the levels for the
dosage adjustment.
Press to opent the following screen.
This menu is only accessible if you have set up a flowrate sensor in the “INSTALLATION” part. Otherwise
it remains grey.
a) « Standard » version
Flowrates are only parameters. The control and low threshold setting are applied at the parameter level and
will be the same for all parameters that are controlled by this flowrate.
The screen shows the flowrate type parameters that are configured. By pressing, an active parameter, you
can configure the flowrates.
Flowrate parameter type.
Press to create or edit the flowrate configuration.
Parameter type isn’t a flowrate.
Parameter isn’t configured
E01 to E08 Parameters identification.
Press to open following screen.
FLOWRATE
Flowrate
Flowrate settings
Flowrate settings
pH Free chlorine
Temperature Flowrate