Programming Instructions

Programming screen « INSTALLATION » Page 39/74
 Active basic load setting for the dosing
- Allows manual adjustment of base load on dosage.
 Active the setting function of the maximum dosing time
- Allows manual adjustment of dosage time count threshold.
 Active the setting function of the hysteresis alarm threshold
- Allows manual setting of alarm hysteresis threshold.
 Active the setting function of the manual dosing stop on alarm
- Allows complete manual setting of stop dosage on alarm.
2) Menu « Settings » - « Setpoint & dosage » [0221]
« Setpoint & dosage » menu will allow you to adjust the operation mode of the dosage plus setpoint
of the parameters.
Press to open the following screen.
The screen presents the parameters that are configured. You can, by pressing an active parameter, configure
the dosage.
Parameter type with dosage output affected.
Press to create or edit dosage configuration.
Parameter type without dosage output affected.
Parameter isn’t configured.
E01 to E08 Identifying parameters.
SETPOINTS
DOSAGE
Setpoint & dosage settings
Parameters with assigned dosing output
pH Free chlorine
Temperature