Programming Instructions

Programming screen « INSTALLATION » Page 37/74
 ‘Flowswitch’ detector of water circulation present
- If your installation has a water circulation sensor in the flow cells you can check this box to configure
the input.
 Temperature sensor (4…20mA) present
- If your installation has a teperature sensor you can check this box to configure the input.
 Press « SAVE » button to validate your configuration.
- You may or may not reset the “User” or “Communication” configurations in addition to the
“Installation & Settings” section.
It’s also possible, if technical support is needed or requested, to reset only the communication or user
part by checking only the box concerned.
Factory initialization
Check the configuration to initialize
NO
YES
User
Communication
Installation & Settings