Installation Instructions

Input mode Page 37/67
Installation and starting instructions
b) Lower banner
Movement arrows are accessible if several display screens are programmed.
Outputs
Relay output non-Used
Relay output in Dosing mode* 4-20mA Output Non Used
Relay output on Timer 4-20mA Output in Dosing mode *
Relay output on Alarm 4-20mA Output in Transfer mode
Relay output on Bottom level tank
Relay output on Water circulation
Relay output on Contact
Relay output on Flowrate
Relay output on ON/OFF Controller or Parameters
 Relay output in Dosing mode
Relay Output 4-20mA Output
No preview screen available
No next screen available
Press it to display preview screen Press it to display next screen
*- Icons are animated when dosing mode is
active.
- The rotation of the dosing symbol depends
on the dosing power.
- The visual state of the relay is displayed
closed when it is active.
Position display
Rotation according to the
dosing power
Bargraph representing the
dosing power of the relay
From 0 to 100%