Installation Instructions

Input mode Page 36/67
Installation and starting instructions
External touch button
Realize the option configured in « Menu User »; « General configuration »; « Button ».
Start/Stop function set as standard.
See Doc0460 « General programming instructions ODITOUCHH » for more information.
Communication Info
Press it to display communication information
For more information about this part, see « DOC0460 General programming instructions
ODITOUCHH ENG Rev1 »
Notifications
No connections to MySyclope server (See. DOC0461 - Communication programming
instructions ODITOUCHH for more information)
USB key detected but not compatible, not readable (USB key must be formatted in FAT32)
Connections to WIFI impossible (See. DOC0461 - Communication programming instructions
ODITOUCHH for more information)
MySyclope connection
USB connection
GSM connection
Wifi connection
Ethernet connection
Inactive Active
Communication Info
SSID: SYCLOPE-Etage
State: Connected
Signal: Good
Unique ID 00:00:F3:EB:35:E5
Host Name ODT_W194120973
DHCP Activated OUI
IP address 10.10.1.90
Mask 255.255.255.0
Gateway 10.10.1.200
DNS 1 10.10.1.100
DNS 2 10.10.1.200
Speed : 19200
Parity : WITHOUT
Address : 1
Port : 502
Peripheral : WIFI
Not available
Not available
Server :
www.syclope.com
Port : 18882
Conf. : Coonected via WIFI
Connected
PIN: PIN OK
State: Connected
Signal: Average
Network : F SFR
APN : m2minternet