Installation Instructions

Technical characteristics and functions Page 12/67
Installation and starting instructions
III. Technical characteristics and functions
1) Technical characteristics
Main features
Type(s) Specification(s) Marker(s)
Consumption 6,5A Max (Without connected dosing accessories) -
Power supply requirements 100-240VAC 50/60Hz -
Electrical protection Fuses 550 mA. Reset by power interruption F5 & F6
Operating temperature (°C) 0 °C to 45 °C (32 °F to 113 °F) -
Case material Polycarbonate -
Dimensions of the case
Length: 280 mm (11 pouces)
Width: 219 mm (8.6 pouces)
Height: 156 mm (6.1 pouces)
-
Case weight 0,850 kg -
Indicator light (LED) Group 0
Display 5 inch color LCD screen Resistive touch -
Environnement
Storage temperature -10 °C to 70 °C (10 °F to 158 °F) -
Max operating altitude 2000 meters
Humidity Max. 90% without condensation -
Protection rating IP 65 -
Product certification CE -
Max overvoltage category of
the power supply network
CAT II
Pollution degree DP 2
Electromagnetic
compatibility
Class B disruption tests comply with EN61326-1
Class B disruption tests comply with EN61326-2-6
Class B disruption tests comply with EN55011
Harmonics tests comply with EN61000-3-2
Harmonics tests comply with EN61000-3-3
Immunity tests comply with EN61000-4-2
Immunity tests comply with EN61000-4-3
Immunity test EN61000-4-4
Immunity tests comply with EN61000-4-5
Immunity tests comply with EN61000-4-6
Immunity tests comply with EN61000-4-8
Immunity tests comply with EN61000-4-11
-
Standard
EN 61000 Electromagnetic compatibility (CEM)
EN 61326 Electrical measuring, control and laboratory equipment
for a standard environment (class B home use)
-
Inputs
Potentiometric inputs 2 inputs (±1V ; Insulation 35VDC ; Impedance 1MΩ) PI1 & PI2
4-20mA Inputs
2 Isolated inputs 24VDC no-load
(0 to 25 mA ; Insulation 35VDC ; Impedance 160Ω)
AI1 & AI2
2 Non-isolated inputs 24VDC no-load
(0 to 25 mA ; Non-isolated ; Impedance 160Ω)
AI3 & AI4
Digital inputs 4 inputs (0 ro 12 VDC ; Non-isolated ; Impedance 5kΩ) DI1 to DI4
USB inputs
USB connector on front (Exclusive use of USB key for Firmware
Update) (5VDC ; 500mA)
-
Outputs
Relay ouputs 2 self-powered relay outputs 3A Max ; 240VAC Max PO1 & PO2
Relay ouputs 2 ON/OFF relay outputs 3A Max ; 48VAC Max FO1 & FO2
Relay ouputs 2 electronic relay outputs 50mA Max ; 48VAC Max RO1 & RO2
Analog outputs 4 0/4…20 mA analog outputs Max ; 12VDC Max ; 500 Ω AO1 to AO4