Programming Instructions

SYCLOPE ODITOUCH setting Page 18/40
Communication programming instructions
 Security Disabled
- Selection of type of security key by your WIFI network, on this selection button we find the
information of the selected type (Disabled).
Press to change it.
When selecting a network using the search window for available networks, the network
security mode is automatically selected.
 Key - - - -
- If you have selected a security mode this option is activated and you must enter the security
key of the WIFI network on which you want to connect.
Press it to open the alphanumeric keyboard and enter the desired value..
 DHCP Active
- Choice of the DHCP configuration of your network.
Press it to ACTIVATE / DEACTIVATE DHCP
 IP address - - - -
- If you disable DHCP you must enter the fixed IP address of your regulator.
Press it to open the numeric keyboard and enter the desired value.
 Mask - - - -
- If you disable DHCP you must enter the subnet mask of your network.
Press it to open the numeric keyboard and enter the desired value.
 Gateway - - - -
- f you disable DHCP you must enter the gateway of your network.
Press it to open the numeric keyboard and enter the desired value.
 Automatic DNS
- Choice of DNS configuration.
Press it to ACTIVATE / DEACTIVATE DNS
 Preferred DNS 8.8.8.8
- If the DNS management isn’t automatic, you must enter the IP address of the Primary DNS.
Press it to open the numeric keyboard and enter the desired value.
 Auxiliary DNS 8.8.4.4
- If the DNS management isn’t automatic, you must enter the IP address of the Auxiliary DNS.
Press it to open the numeric keyboard and enter the desired value.
Save:
- When a modification is made, the « Save » button appears (floppy disk icon), you have to
press it to save your configuration.