Programming Instructions

Programming screen « Setup menu » Page 69/78
General programming instructions
 Front board firmware
- When a firmware for the front face is available on the key, the corresponding update button activates.
To perform the update, press the button.
 Base board firmware
- When a firmware for the lower card is available on the key, the corresponding update button
activates. To perform the update, press the button.
 Module firmware
- When a firmware for the module is available on the key, the corresponding update button activates.
To perform the update, press the button.
 Export configuration
- Export the complete machine configuration to a binary file on the USB key. To export press the
button.
 Export history
- Not available.
 Import configuration
- When a configuration file is available on the key the button activates. Press the “Import configuration”
button, it’s then possible to import or not the “User” and “Communication” configuration in addition to
the “Installation & Settings” part.
When you are on the main screen and you insert a USB key with an update, the window
below will open automatically asking you if you want to open the programming screen.
Update detected on the key.
Open the programming screen?
NO YES
Download configuration(s)
Check items to import.
NO
YES
User
Communication
Settings & Setup