Programming Instructions

Programming screen « Setup menu » Page 61/78
General programming instructions
 Enable screen protection
- You must check this option to enable screen protection management. Without pressing the screen
during the time entered, the back-light level will decrease to the set value. Here the management is
(Active).
 Delays time before activation 15 minute(s)
- Enter the delay value before screen protection activation. Here the delay is (15) minutes.
Press to open the numeric keyboard and enter the desired value.
 Back-light level
- Enter back-light value during screen protection. Here the value is (20) %.
Press to open the numeric keyboard and enter the desired value.
b) Menu « General configuration » - « SOUNDS » [0111]
 Beep on screen touch
- You must check this option to enable beep management et each valid tap on the screen. Here the
option is (Active).
 Beep on alarm
- You must check this option to enable the management of a beep every second in case of a “general”
alarm. Here the option is (Disabled).
 Sound adjustment
- You can change the sound rendering of each beep. By pressing the beep setting icon, you can change
the beep frequency and its duration.
Move the cursors by remaining pressed to change the frequency and duration values.
GENERAL USER SETTINGS
Screen
Sounds
Colors
Indicators
Button
Alarms
Restore
Beep on screen touch
Beep on alarm