Programming Instructions

Programming screen « Setup menu » Page 26/78
General programming instructions
« Special case of a Water Flow Switch »
 DI2 - Function Water Flow switch
- Digital input operation mode selection, on this selection button we find the information of the input in
the process of modification (DI2) and the currently selected function (Water Flow switch). Press to
change it.
 Contact idle state NO
- Choice of idle state to be taken into account, this check box contains the information currently
selected (NO).
Press to toggle NO (normally open) mode to NC (normally closed) mode.
 Activation delay time OFF Second(s)
- Enter the time that the input must remain during its activation before the information is taken into
account. Here it is (OFF) seconds.
Press to open the numeric keyboard and enter the desired value.
Adjustment possible from 0 to 240 Second(s).
 Deactivation delay time 5 Second(s)
- Same as before, but for reverse state.
To delete the input configuration:
- You must select « NONE » from the list of functions and save your configuration by pressing the
“SAVE” button.
Same layout and options for Tank level, Remote control / state.
Digital input setting
DI2 - Function Water Flow switch
Contact idle state NO
Activation delay time
second(s)
OFF
Deactivation delay time
second(s)
5