Programming Instructions

Programming screen « Setup menu » Page 25/78
General programming instructions
a) Digital input setting [1331]
Special case of a Volume counter
 DI1 – Function Volume counter
- Digital input operation mode selection, on this selection button we find the information of the input in
the process of modification (DI1) and the currently selected function (Volume counter). Press to
change it.
 Unit imp/l
- Select flowrate unit, selection button displays the information of the currently selected unit (imp/l).
Press to change it.
 Volume per pulse ratio 1.000 imp/l
- Enter the pulse weight for flow calculation. Here the current value is (1.000).
This value is directly related to your volume counter, to calculate it, you must refer to the volume
counter documentation.
Press to open the numeric keyboard and enter the desired value.
To delete the input configuration:
You must select « NONE » from the list of functions and save your configuration by pressing the “SAVE”
button.
Digital input setting
DI4 – Function Volume counter
Unit imp/l
Volume per pulse ratio
imp/l
1.000