Programming Instructions

Programming screen « Setup menu » Page 13/78
General programming instructions
 Lock code « Setup »
- Activate or deactivate the security code to access the « Setup » menu
 Lock code « Settings »
- Activate or deactivate the security code to access the « Settings » menu
 Lock the « Settings » level with the « Setup »code
- Use the « Setup » code to lock the « Settings » menu
 Reset all cycles after power failure greater than 30 min
- Stop and cancel all peripheral cycle (Bleed, Biocide A, Biocide B, Inhibitor and dispersant), if the
controller is power off more than the value of this option.
 Reset all cycles after controller stop greater than 30 min
- Stop and cancel all peripheral cycle (Bleed, Biocide A, Biocide B, Inhibitor and dispersant), if the
controller is in OFF mode more than the value of this option.
Press to access to the “Setting options” page
 Enable base load setting for dosing
- If this box is checked, this option allows manual adjustment of base load on dosage.
 Enable the setting of the activation time max. dosing
- If this box is checked, this option allows manual adjustment of dosage time count threshold.
 Enable the alarm threshold hysteresis setting
- If this box is checked, this option allows manual setting of alarm hysteresis threshold.
 Enable manual setting for stop dosing on alarm
- If this box is checked, this option allows complete manual setting of stop dosage on alarm.
Setup Options
Enable base load setting for dosing
Enable the setting of the activation time max. dosing
Enable the alarm threshold hysteresis setting
Setting options
(Page 2/3)
Enable manual setting for stop dosing on alarm