Programming Instructions

SYCLOPE COOLTOUCH setting Page 24/40
Communication programming instructions
Example :
If Setpoint is entered on your regulator so it’s modifiable on web page.
When an orange bubble with a question mark appears on the calendar icon, it means that a
maintenance operation is scheduled in the coming week.
When a red bubble with a question mark appears on the calendar icon, it means that the date of a
scheduled maintenance operation is exceeded.
If there is no bubble, this means that no maintenance task is scheduled for this month.
Click on the calendar to open the next window.
When the date is highlighted in red it means that a
maintenance operation was planned on that date but that it
was either not carried out or indicated as carried out.
When the date is highlighted in orange it means that a
maintenance operation is planned in the next week.
When the date is highlighted in orange it means that a
maintenance operation is planned in more than 1 week.
E02 : Conductivity
1905
µs/cm
Type of measurement
Measured value & Unit
Servitude notifications
area
Large window switch
Mini window
E02 : Conductivity
1905
Setpoint : OFF
2000 µs/cm
600 µs/cm
Setpoint OFF => not
modifiable
Adjustable high and low
alarms
µs/cm
Small window switch
Type of measurement
Measured value & Unit
Servitude notifications
area
Large window
Maintenance calendar
Conductivity (SI1)
Relay : Bleed (PO1)
10/06/2022 - Cleaning
16/06/2022 – Sensor replacement
01/08/2022 – Membrane replacement
30/06/2022 – Tubing
10/06/2022 - Cleaning
16/06/2022 – Sensor replacement
01/08/2022 – Membrane replacement