Programming Instructions

SYCLOPE COOLTOUCH setting Page 18/40
Communication programming instructions
 WIFI configuration test
Press the button to open the test window
Connection phases, module initialization and connection request on the selected network.
When the connection is successfully completed, the icon is displayed in green and the IP address assigned to the
WIFI is displayed.
In the event of an error, the icon is displayed in red and a message corresponding to the type of error is displayed.
 List of errors
- « Password error » => Password isn’t correct
- « Timeout » => Connection failed within the limit time
- « Network not found » => SSID network wasn’t found
- « Unknown error » => An unknown error has occurred
Connection test
CANCEL
WiFi module
initialization…
CANCEL
Connection request
on the network…
CLOSE
Successfully connected.
192.168.1.88
CLOSE
Connection refused.
Password error.