Programming Instructions

SYCLOPE COOLTOUCH setting Page 16/40
Communication programming instructions
b) WIFI configuration [2731]
Press to open following screen.
 WIFI Enabled
- Activation of the WIFI integrated in your regulator. When the box is checked the WIFI module is activated.
Press it to change its state.
 SSID ----
- Enter the name of the WIFI network on which you want to connect.
Press to open the alphanumeric keyboard and enter the desired value.
 Scan of available networks
- By pressing this key, the search for networks is launched
and a list with the networks found nearby is displayed.
- Press to open the list of networks.
Password-secure network with excellent signal level
Open network with low signal level
WIFI
Wifi settings
WIFI enabled SSID
IP Address 0.0.0.0 Preferred DNS 8.8.8.8
Security Disabled
Key
DHCP Enabled DNS Automatic
Gateway 0.0.0.0 Connection test
Mask 255.255.255.0 Auxiliary DNS 8.8.4.4