Installation Instructions

Display mode and type Page 35/57

Installation and starting instructions

On/Off button

Controller switched off – Press it to switch the controller ON

Controller switched on – Press it to switch the controller OFF

External touch button

Realize the option configured in « Menu User »; « General configuration »; « Button ».

Start/Stop function set as standard.

See “DOC0485 - General programming instructions COOLTOUCH ENG Rev1” for more

information.

Communication Info

Press it to display communication information

For more information about this part, see « DOC0485 - General programming instructions

COOLTOUCH ENG Rev1 »

Communication Info

SSID: SYCLOPE-Etage

State: Connected

Signal: Good

Unique ID 00:00:F3:EB:35:E5

Host Name ODT_W194120973

DHCP Activated OUI

IP address 10.10.1.90

Mask 255.255.255.0

Gateway 10.10.1.200

DNS 1 10.10.1.100

DNS

2 10.10.1.200

Speed: 19200

Parity: WITHOUT

Address: 1

Port: 502

Peripheral: WIFI

Not available

Server:

www.syclope.com

Port: 18882

Conf.: Connected via WIFI

Connected

PIN: PIN OK

State: Connected

Signal: Average

Network: F SFR

APN: m2minternet