Installation Instructions

Display mode and type Page 34/57
Installation and starting instructions
VII. Display mode and type
SYCLOPE COOLTOUCH
®
regulator are fitted with a color touch screen graphic, all programming actions
are realized with by pressing the screen. The touch screen is a resistive technology, you must press firmly
on the screen to validate the action.
Make sure that your SYCLOPE COOLTOUCH
®
controller is correctly programmed! An excess
of product, or even a mixture, can cause harmful actions on human health and the environment.
1) Main screen display
a) The upper banner
Menu button programming – Press to open the menu
For more information about this part, see « DOC0485 - General programming instructions
COOLTOUCH ENG Rev1»
General notifications
Active alarm(s) *
* Depending on User configuration
Calendar Icon
Calendar – Tap to access the maintenance schedule.
MENU button
programming
Name of controller
Generals notifications
On/Off
Button
Communication
Info
09/09/2016
17:3
9
Date & Hour
22/06/2020 11:39
°
Volume
Conductivity
Temperature
Free chlorine
Bleed
Flow switch
Biocide A
Biocide
B
Inhibitor
Dispersant
Conductivity
10
l
16
µS/
cm
39.0
°C
0.83
mg/l
Salinity
0.02
g/l
0 l
0 l 0 l