Specifications

Reorganizing controls in the form
548 InfoMaker
InfoMaker selects the column and displays a line representing the column
border:
3 Drag the column left or right.
4 Release the mouse button to drop the column into position.
Copying and pasting controls in the Form painter
You can copy controls within a form and to other forms. All properties of the
control are copied.
❖ To copy a control in the Form painter:
1 Select the control in the Layout view.
2 Select Edit>Copy from the menu bar or press Ctrl+C.
The control is copied to the clipboard.
3 Paste the control.
To paste the control within the same form, select Edit>Paste from the
menu bar or press Ctrl+V.
To paste the control in another form, open the Form painter again, open the
desired form, and paste the control.
InfoMaker pastes the control at the same location as in the source form. If
you are pasting into the same form, you should move the pasted control so
that it does not overlay the original control. InfoMaker displays a message
box if the control you are pasting is not valid in the destination form.
Cutting controls
You can also select one or more controls and cut the controls by selecting
Edit>Cut from the menu bar.