SD-PEX10005 1 PCIe Parallel Printer Controller Card Model: SD-PEX10005 User Manual Ver. 2.
SD-PEX10005 2 Product Introduction This board is a single-chip, PCI Express parallel card that uses the latest PCI Express interface standard for expansion bus, enabling this card to be installed on any PCI Express capable PC desktop system. Most new end motherboards do not come equipped with a parallel port. This card adds the parallel port functionality to their computer for connecting their parallel devices. Features - Compliant with PCI Express Base Specification revision 1.
SD-PEX10005 3 System Requirements - Supports Windows® XP/Vista/2000/7/8/Server 2003/ Server 2008, Linux, Mac OS/X 10.5, Dos 6.22 Hardware Installation 1. Turn off the power to your computer 2. Unplug the power cord and remove your computers cover 3. Locate an empty PCI Express x1, x4, x8, or x16 slot on the motherboard 4. To install, carefully align the cards bus connector with the selected PCIe slot on the motherboard. Push the board down firmly. 5.
SD-PEX10005 4 > Windows XP 32-bit, Server 2003 32-bit: (CD Drive):\Moschip\MCS9900\Win2K_XP_Server2003\Windows32bit > Windows XP 64-bit, Server 2003 64-bit: (CD Drive):\Moschip\MCS9900\Win2K_XP_Server2003\Windows64bit > Windows Vista 32-bit, Server 2008 32-bit: (CD Drive):\Moschip\MCS9900\Vista_Server2008\ Windows32bit > Windows Vista 64-bit, Server 2008 64-bit: (CD Drive):\Moschip\MCS9900\ Vista_Server2008\Windows64bit > Windows 7 32-bit: (CD Drive):\Moschip\MCS9900\ Windows 7\Windows32bit > Windows
SD-PEX10005 5 5. Select: Browse my computer for driver software. 6. Select: Let me pick from list of device drivers on my computer. 7. Check in: Show compatible hardware. 8. Click Parallel Port 9. Click Have Disk button 10. Click Browse, navigate to Driver Windows files: 11. MCS9900 > MCS9900_XP > Win32/Win64 > StnPorts.inf ; click next 12. Click “Continue Anyway” Drivers should be installed.
SD-PEX10005 6 FAQ Question: Can I change the address for the port I/O range? Answer: No, due to the chipset limitation our devices do not allow you to change the address for the I/O range. Question: I installed the card but it is not recognized in my system? Answer: Try reseating the card into another PCIe slot if available. If that fails try updating the motherboard/BIOS. Also ensure that any optional system updates have been applied.
SD-PEX10005 7 Version Information Version: 2.0 Date Updated: 3/21/2014 Changes/Fixes: - Compiled manual information into .pdf format. - Cleaned up wording and text throughout the previous 1.0 manual. - Added documentation for manual driver install - Added chipset model to document. - Added FAQ of general information.
