Paper Trimmers Edge Series ENGLISH Operating Instructions DEUTSCH Bedienungsanleitung FRANÇAIS Mode d’emploi ITALIANO Istruzioni per l’uso ESPAÑOL Instrucciones de funcionamiento NEDERLANDS Instructies
Operating Instructions Guide rail Plastic pressure clamp Cutting head (Code: 40909X) Standard paper formats Specifications Product Code Maximum Paper Size Cutting Length Cutting Sheet Capacity* Capacity** 42013X A4 320mm 1.0mm 10 42014X A3 450mm 1.0mm 10 * Based on paper or light card only ** Based on standard 80gsm paper www.swordfishsupport.
Operating Instructions Operation 1 Slide cutting head to either end of guide rail. 2 Slide paper under plastic pressure clamp and position flush with side of trimmer. 3 CUTS UP TO 10 Apply downward pressure and push or pull the cutting head along the guide rail.
Operating Instructions Replacing or realigning the cutting head 1 2 Remove end cap by sliding upwards 3 Pull out guide rail and slide cutting head off 4 B Slide new cutting head onto guide rail Replace guide rail and end cap A. Rubber wheel should sit on top of the plastic pressure clamp B.
Product Warranty Paper Trimmers Edge Series GB Product Warranty DE Produktgarantie FR Garantie du produit ES Garantía del producto IT Garanzia sul prodotto NL Productgarantie www.swordfishsupport.
Product Warranty GB Product Warranty Swordfish Trimmers SWORDFISH 2-YEARS LIMITED WARRANTY FOR PARTS AND LABOUR Swordfish trimmers are warranted against failure or malfunction due to faulty components or workmanship for a period of 2 years from the date of purchase by the original consumer. Defects or failures, which have been caused by incorrect or wrongful use, regardless whether unintentional or intentional during the operation or maintenance of the device, are excluded from the warranty.
Product Warranty ES Garantía del producto Guillotinas de Swordfish LA GARANTÍA DE SWORDFISH ES LIMITADA POR 2 AÑOS EN PIEZAS Y MANO DE OBRA Guillotinas de Swordfish están garantizadas frente a cualquier fallo o mal funcionamiento debido a componentes defectuosos o problemas de fabricación durante un periodo de 2 años, a partir de la fecha en la que fueron adquiridas por su comprador original.
Product Warranty Product Registration Please register your Swordfish product at www.swordfishsupport.com to validate your warranty and ensure you receive the best level of customer care. By registering your product, you will have the option to receive special offers and promotions. Troubleshooting & Product Support For troubleshooting and product support, please visit www.swordfishsupport.com.