User's Manual
Table Of Contents
- SWORD Health User Manual
- Getting to know SWORD Phoenix
- 1 - Introduction
- 2 - Indications, Contraindications and Adverse Events
- 3 - Candidate Selection
- 4 - Components
- 5 - Digital Therapist Kits
- 6 - Setup
- 7 - Motion Trackers
- 8 - Patient’s Card
- 9 - Straps
- Phoenix Portal
- 10 - Create a User Account
- 11 - Accessing the Portal
- 12 - Getting to Know the Portal
- 13 - Patient List
- 14 - Add a New Patient
- 15 - Patient Screen
- 16 - Prescription
- 17 - Prescribe a Session
- 18 - Set Exercise Difficulty Level
- 19 - Patient Results
- 20 - Patient Profile
- 21 - Overview
- 22 - Daily Summary
- 23 - Send Messages
- 24 - Settings
- Digital Therapist
- 25 - Turn On the Digital Therapist
- Support
- Technical specifications
- 34. Service and inspections
- 35. Regulatory Statements
63
Step 4 - Choose a type of patient authentication
If you chose the Patient user mode, you’re required to choose the way the patient will authenticate
himself. If you chose the Multi-Patient user mode, you can automatically skip to Step 8.
There are two ways to authenticate a patient:
● Card - The patient will use a card to log into the system.
● Patient Key - This type of authentication was discontinued, therefore it must not be used.