User's Manual

Page 12 of 15
SERVICE AND INSPECTIONS
Cleaning
Follow these general rules when cleaning the outside of ALPHA Motion Tracker:
• Make sure the motion tracker is unplugged from the power supply before
cleaning.
• Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do
not use thinner or benzene, abrasive cleaners or compressed air.
• To clean the trackers, use a cloth lightly dampened with a mild detergent.
• Avoid getting liquids inside. If liquid does get inside, have a qualified service
technician to check it before you power it on again.
Maintenance
ALPHA Motion Tracker has an expected service life of 3 years. In order to guarantee
a perfect and effective functioning of the equipment, it is recommended an annual
inspection by a service technician authorized by the manufacturer.
Only authorized specialists can perform technical support and
maintenance of ALPHA Motion Trackers. Do not open the equipment.
Opening the equipment by unauthorized personnel will result in loss of
warranty. In case of malfunction, contact the manufacturer.