Instructions for use T99000080-2

V3 ECU
1.Connect one end of the servo cable (provided) between
the ECU port labeled “ppm” and the other end to your
receiver, if use telemetry function, use telemetry port.
2. Connect the Battery cable to ECU port labeled “3S
LIPO BATT”
3. Connect the pump to the deans connector on the battery
cable
4. Connect the GSU to the ECU port labeled “GSU/PC”.
5. Connect the engine cable to the ECU port labeled
“ENGINE”.
Engine cable
Brushless Pump
Throttle line
Battery power cable
Brushless pump