Operation Manual

Setting the Channel

1. Press MENU button till function mode appears. See Fig 14.

2. Press MENU selection buttons & to select Channel, and press the

SELECT button.

NOTE1: If you own a camera (channel 1) , please select RF1.

NOTE2: If you own two cameras(channel 1 & 2),please select RF1 & RF2.

3. After using buttons & to finish adjusting, press the SELECT button.

Setting the Switch Time

If you own several cameras, you can take turns to monitor.

1. Press MENU button till function mode appears. See Fig 15.

2. Press MENU selection buttons & to select 4SEC or 8SEC,

and press the SELECT button.

3. After using buttons & to finish adjusting, press the SELECT button.

Setting the Alarm

The monitor will emit the alarm sound and glisten when the camera

senses motion.

1. Press MENU button till function mode appears. See Fig 16.

2. Press MENU selection buttons & to select ON.OFF or MUTE, and

press the SELECT button.

NOTE:The monitor will emit the glisten only, if you select MUTE.

3. After using buttons & to finish adjusting, press the SELECT button.

Setting the Alarm Time

1. Press MENU button till function mode appears. See Fig 17.

2. Press MENU selection buttons & to select 15SEC.30SEC

or 60SEC, and press the SELECT button.

3. After using buttons & to finish adjusting, press the SELECT button.

Setting the Volume

Press buttons & to select volume. See Fig 18.

3.4

3.5

3.6

3.7

3.8