Operation Manual

Setting up the Monitor
Power Supply
1. Plug one end of the provided power adapter into a wall outlet and the
other end into the back of the monitor. See Fig 8 .
Note:Use the adapter labeled OUTPUT:12V DC with the monitor.
2. Turn the monitor on.
Connecting to Wire Cameras
Insert the A/V cable of the camera in the A/V IN jack of the monitor.
Connecting to TV
Insert one end of the A/V cable into the A/V OUT jack of monitor and the
other end into one A/V IN jack of TV. See Fig 10 .
Function Displays
Setting the Brightness
1. Press MENU button till function mode appears. See Fig 11.
2. Press MENU selection buttons & to select Brightness, and press the
SELECT button.
3. After using buttons & to finish adjusting, press the SELECT button.
Setting the Contrast
1. Press MENU button till function mode appears. See Fig 12.
2. Press MENU selection buttons & to select Contrast, and press the
SELECT button.
3. After using buttons & to finish adjusting, press the SELECT button.
Setting the Saturation
1. Press MENU button till function mode appears. See Fig 13.
2. Press MENU selection buttons & to select Saturation, and press the
SELECT button.
3. After using buttons & to finish adjusting, press the SELECT button.
2
2.1
2.2
2. 3
3
3.1
3.2
3.3
3