SDS
   Safety Data Sheet 
Date of Issue: June-24-2015              File No.: EVE-SDS-062401 
Page 1 of 7 
This  sheet  is  provided  as  technical information  only.  The  information  and  recommendations  set  forth  are  made  in  good  faith  and 
believed to be accurate as of the date of preparation. EVE Energy Co., Ltd make no warranty, expressed or implied, with respect to this 
information and disclaims all liabilities from reliance on it. 
1.  IDENTIFICATION 
Product Identifier 
Name of Product: Lithium Ion Battery 
Other means of identification 
Product Models: 442830H 
Nominal Voltage: 3.8V 
Nominal capacity: 400mAh 
Nominal power: 1.52Wh 
Weight: 8g 
Recommended use of the chemical and restriction on use 
Recommended Use: Rechargeable Li-ion Battery 
Restriction On Use: No information available 
Information Of Supplier: 
Company Name: EVE Energy Co., Ltd 
Address: EVE Industrial Park, NO.36,Hui Feng 7th Road , Zhongkai Hi-Tech Zone, HuiZhou, 
Guangdong, China   
Zip code: 516006 
Contact person: Li Xiaohua  
Tel: +86-752-2707102  +86-18675780912 
E-mail: Thomson@evebattery.com   
Emergency Telephone 
+86-752-2606966   
2.  Hazard(s) Identification 
Classification:   
This product is an article which is a sealed battery and as such does not require an SDS per the OSHA hazard 
communication standards unless ruptured. The sealed Li-ion Battery is not hazardous in normal use. 
Signal Word: No signal word 
Hazard Statements and Symbol 
Hazard statement:   No hazard statement 
Pictogram(s):      No pictogram 
Precautionary Statements:  No Precautionary Statements   
 Description of any hazards not otherwise classified 
 In case of mistreatment(abusive over charge, reverse charge, external short circuit…) and in case of fault some 
electrolyte can leak from the cell through the safety device. In these case refer to the risk of the electrolyte. 
Contact with internal components may cause irritation or severe burns. Irritating to eyes, respiratory system 
and skin. The electrode materials are only hazardous, If the material are released by mechanical damaging of 







