User Manual

①When mounting on more rugged surfaces like
concrete or brick:
Drill holes with the 6 mm (15/64'') sized drill bit
according to the alignment sticker, hammer the
drywall anchors into the wall, then screw the base
using four M3 × 20 mm (#5 × 25/32'') screws firmly
to the wall.
b. Choose drill bit size and mount the base
a. Confirm installation position
What you'll need for installation: an electric drill,
a screwdriver and a rubber hammer.
For outdoor usage, we recommend that you
install your camera using screws to prevent it
from falling accidentally. Concrete or other hard
surfaces can be challenging for drilling. If you
are not experienced with drilling into a particular
type of wall, you may want to consider consulting
a professional.
Stick the alignment sticker on the spot where
you plan to install your camera.
Method 1: Install Using Screws
Prepare a proper-sized drill bit before drilling.
09 10