User Manual

Open the SwitchBot app and sign in to your
account. Tap "+" at the top right of the home page,
find the Outdoor Spotlight Cam icon and select,
then follow the instructions to add your camera.
1. Add your camera to the SwitchBot app
Please fully charge your camera battery before
mounting it. Remove the rubber plug at the back
of your camera, find the Type-C charging port
and connect it to a power supply with the USB
cable included.
Note:
• Use an adapter with 5 V 2 A output or higher.
• The battery charging indicator light will be solid
red when your camera is charging and turn solid
green when your camera is fully charged.
2. Fully charge your camera
Getting Started
• To ensure your camera works normally after
installation, it is recommended that you test the
Wi-Fi connection of the area you'd like to install
it. Place your camera in the area and then check
the video quality and fluency via the app.
• The perfect height and angle to install your
camera are shown in the picture below:
Height: 2.5 m (8.2 ft.) above the ground
Angle: 15° downwards vertically
• You can keep your camera plugged in by
connecting it to a power supply or a Solar Panel
using the USB cable. Please select an appropriate
installation location based on the cable length.
• When you connect your camera to a Solar Panel,
make sure to place the Solar Panel in an area that
can receive direct sunlight.
What you need to know before installation:
Installation
07 08
2.5 m (8.2 ft.)
15°