User Manual

Method 3: Mount your camera on a stand
You can also mount your Outdoor Spotlight Cam
on a camera stand (not included). Align the tapped
hole at the bottom of your camera with the screw
on the stand, then rotate your camera to tighten
it onto the stand. Make sure your camera is firmly
mounted, then adjust the stand to get the view
you want based on the live view shown on the app.
c. Attach your camera to the base
Attach your camera to the base. You can adjust
the camera angle to get the view you want based
on the live view shown on the app.
Press for
2 minutes
a. Confirm installation position
Stick the adhesive wall mount to the choosen spot,
squeeze out the gases between the wall mount
and the wall, then press for 2 minutes to secure
it. (In cold weather, you can use a blow dryer, hot
water bottle or a fan heater to heat the adhesive
wall mount up before pressing it.)
b. Mount the base
Screw the base into the wall mount using four
M3 × 6 mm (#5 × 1/4'') screws. Make sure the
base is firmly mounted.
13 14