User Manual

LED Indicator Light
Camera Lens
Mic
Base
Reset Button
Mounting Slot
Speaker
Micro USB Port
Screw Hole
Magnet (inside)
Base Cover
(removable)
.PVOUJOH4MPU
Bottom
Side
Front
Back
Micro SD Card Slot
User Manual
www.switch-bot.com
V1.2-2110
Product Name: SwitchBot Indoor Cam
Power Input: 5V 1A
Video Resolution: 1080P HD
Image Compression: H.264
Micro SD Card: Up to 128GB, FAT32
format
2SHUDWLQJ7HPSHUDWXUH૟WR૟
(5 ºF to 113 ºF )
Relative Humidity: <95 %
Wireless Standard: 802.11b/g/n (2.4GHz)
ΏConnect the power cable.
Now the red light of the camera stays lit
up. When the red light flashes quickly,
this indicates that the camera is waiting
for network distribution. You can start
using the camera according to the steps
from "Getting Started".
ΎPlace indoor cam with the base.
Mount the base to the back or the bottom
of indoor cam. The base can be attached
to an iron surface or a magnet.
The base can also be fixed with screws.
Package Contents Specifications Name of Parts
The indoor cam can be placed on table,
wall, ceiling and other flat surfaces.
΍Place indoor cam without the base.
Place indoor cam directly on a table or
shelf or stick it on a flat surface using the
3M sticker.
Install Indoor Cam
Indoor Cam x 1 Base x 1
Sticker x 2
USB Adaptor x 1
Screw Pack x 1 User Manual x 1
Micro USB Cable (2m) x 1
You can also stick the base to a flat surface
using the 3M sticker. After indoor cam is
properly installed, tilt to a desired angle.
 
 