User's Manual

3.Appearance Instruction
Transmitter FLOW2000
⑴ Antenna
⑵ Product label
⑶ Link：Wireless status indicator
⑷ Vi
deo：Video signal indicator
⑸ Power：Power status indicator
⑹ OLED：0.96-inch OLED
⑺Five-direction switch：Five-direction adjustment button (adjust the display menu to switch and confirm in five
directions: up, down, left, right, and vertical)
⑻ Installation thread：1/4”-20 thread. Use the package supplied articulating arm trestle to install the device to
the camera.
⑼ USB：Micro USB, software upgrade interface
⑽ HDMI in： HDMI input (HDMI-A type connector)
⑾ Battery plate：”F” plates can be used. We recommend SWIT batteries like: S-8972, S-8970, S-8770,S-8975
compatible with SONY “L” series NP-F770/970.
⑿ SDI LOOP：SDI Loop out (BNC connector)
⒀ SDI in：SDI input (BNC connector)
⒁ ON/OFF：Power switch
⒂ DC in：Support DC 7-34V voltage input, 5.5mm (outer diameter) /2.1mm (inner diameter). Outside: negative,
Inside: positive