Model: S-1221H 21.5" Broadcast Studio LCD Monitor User Manual Please read this User Manual throughout before using.
Preface Congratulations on your purchase of this product. Please read this user manual carefully. 1 ． All internal technologies of this product are protected, including device, software and trademark. Reproduction in whole or in part without written permission is prohibited. 2 ． All brands and trademarks of SWIT Electronics Co., Ltd. are protected and other relative trademarks in this user manual are the property of their respective owners.
Maintenance The Monitor 1. Please keep the signal terminals and the cooling vent away from knife-edge, metal or liquid in order to avoid short-circuit and damage. 2. Please don't try to disassemble any parts of the monitor by yourself, which would probably damage the monitor and do harm to human body, and it will cause the invalidation of product warranty. 3. Please don't touch the screen with your fingers, which would probably deface the screen. 4.
1. Features ◆ Full-HD 21.5” LCD Panel 1920×1080 resolution, 1000:1 contrast ◆ Multiple inputs 3G/HD/SD-SDI, HDMI and Composite input ◆ Loop through outputs SDI, HDMI has loop through output ◆ SDI 1080psf supported Support SMPTE-RP211 format: 1080psf (30 / 29.97 / 25 / 24 / 23.98) ◆ 2-ch audio meter Under HDSDI and HDMI, it displays 2 channels embedded audio bars with mark.
2. Panel Instruction Front view ⑴ Speaker: For SDI/HDMI embedded audio and analog audio monitoring. (Will not work if earphone is plugged in) ⑵ SDI1: Press “SDI1” to switch to SDI input 1 ⑶ SDI2: Press “SDI2” to switch to SDI input 2 ⑷ HDMI: Press “HDMI” to switch to HDMI input ⑸ CVBS: Press “CVBS” to switch to CVBS input ⑹, ⑺, ⑻, ⑼ F1, F2, F3, F4: User definable function keys ⑽ DISPLAY: Press “Display” to display safe area, scale marker, title and the current input signal information.
Rear view ⑴ Battery plate Install: V-mount or Gold mount battery plates install position, with a hole to connect the battery plate power wires to the main board inside.
3. Menu Operation ⑴ Press “MENU” and it will display menu system ⑵ Revolve “ENTER” to select an item. The selected item will be highlighted display. ⑶ Press “ENTER” to enter the selected item. ⑷ Under menu system, press “MENU” to back to previous menu. *The menu will automatically save and quit if it remains idle. 3.
3.5 DISPLAY submenu The DISPLAY submenu is to select the items to be displayed on screen when ‘DISPLAY” button is pressed. Revolve "ENTER" to turn on/off the items: INFO: Including Input format, aspect ratio, underscan/overscan, zoom status TITLE: User edited title MARKER SEL: Select the scale marker from 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1 and OFF SAFE AREA: Select the safe area scale from 80%, 85%, 90%, 95% and OFF. MARKER CLR: Select the color of markers from WHITE, RED, GREEN, BLUE, BLACK and GRAY.
5. Specifications LCD Performance Size Display area Resolution Aspect ratio Brightness Contrast Color Viewing angle Video Format CVBS SMPTE-425M SMPTE-274M SDI SMPTE-RP211 SMPTE-296M SMPTE-125M ITU-R BT.656 HDMI General Working voltage Power consumption Working temperature Working humidity Storage temperature Storage humidity Dimensions (w/o stand) Net weight (w/o stand) 21.5 inches 477 268mm 1920 RGB 1080 16:9 (4:3 adjustable) 250cd m2 1000:1 16.
7.
8. Installation Dimension 8.1 With Desktop Stand Feet (in mm) 47 4-M4 screw hole 100 108 160 381 358 269 4 100 1 "-20 screw hole (depth 6mm) 78 23 525 478 135 8.2 With VESA Desktop Stand (in mm) 525 100 160 100 1 67 425 4 "-20screw hole (depth 6mm) 78 47 30 270 165 531 508 160 425 78 89 40 8.
