Manual

2. Panel Instruction
Front view
Speaker: For SDI/HDMI embedded audio and analog audio monitoring. (Will not work if earphone is
plugged in)
SDI1: Press “SDI1” to switch to SDI input 1
SDI2: Press “SDI2” to switch to SDI input 2
HDMI: Press “HDMI” to switch to HDMI input
CVBS: Press “CVBS” to switch to CVBS input
, , , F1, F2, F3, F4: User definable function keys
DISPLAY: Press “Display” to display safe area, scale marker, title and the current input signal
information.
MENU: Press to enter Menu
ENTER: Select and Apply
Under menu system, revolve “ENTER” to adjust settings and press to apply; and out of menu system,
directly revolve “ENTER” to adjust volume.
BRIGHT: Revolve “BRIGHT” to adjust brightness value from 0 100. Default value is 50.
CONTRAST: Revolve “CONTRAST” to adjust contrast value from 0 100. Default value is 50.
SATURATION: Revolve “SATURATION” to adjust saturation value from 0 100. Default value is 50.
POWER: Power on/off
Connect with power cable, press the “POWER” to switch on the monitor. Press again to switch off.
Disconnect with power cable if the monitor will not be used for a period of time.
PHONE 3.5mm earphone socket, for SDI/HDMI embedded audio and analog audio monitoring.
Desktop Stand Feet
TALLY Light: Red, Green and Yellow 3-color TALLY indicator