Model: S-1161H 15.6" Broadcast Studio LCD Monitor User Manual Ver: 1161HV1.0V02 Please read this User Manual throughout before using.
Preface Congratulations on your purchase of this product. Please read this user manual carefully. 1 ． All internal technologies of this product are protected, including device, software and trademark. Reproduction in whole or in part without written permission is prohibited. 2 ． All brands and trademarks of SWIT Electronics Co., Ltd. are protected and other relative trademarks in this user manual are the property of their respective owners.
Maintenance The Monitor 1. Please keep the signal terminals and the cooling vent away from knife-edge, metal or liquid in order to avoid short-circuit and damage. 2. Please don't try to disassemble any parts of the monitor by yourself, which would probably damage the monitor and do harm to human body, and it will cause the invalidation of product warranty. 3. Please don't touch the screen with your fingers, which would probably deface the screen. 4.
1. Features ◆ 10-bit Full-HD 15.6” LCD Panel ◆ Blue Only 1920×1080 resolution, H 178°/V 178° viewing Under Blue Only Mode, only blue pixels are used angle, 1000:1 contrast, 10-bit color depth to generate the image, because hue and saturation ◆ Multiple inputs 3G/HD/SD-SDI, HDMI and Composite input ◆ Loop through outputs SDI, HDMI has loop through output ◆ 2-ch audio meter can be adjusted quicker and more accurately.
2. Panel Instruction Front view ⑴ Speaker: For SDI/HDMI embedded audio and analog audio monitoring. (Will not work if earphone is plugged in) ⑵ SDI1: Press “SDI1” to switch to SDI input 1 ⑶ SDI2: Press “SDI2” to switch to SDI input 2 ⑷ HDMI: Press “HDMI” to switch to HDMI input ⑸ CVBS: Press “CVBS” to switch to CVBS input ⑹, ⑺, ⑻, ⑼ F1, F2, F3, F4: User definable function keys ⑽ DISPLAY: Press “Display” to display safe area, scale marker, title and the current input signal information.
Rear view ⑴ Battery plate Install: V-mount or Gold mount battery plates install position, with a hole to connect the battery plate power wires to the main board inside.
3. Menu Operation ⑴ Press “MENU” and it will display menu system ⑵ Revolve “ENTER” to select an item. The selected item will be highlighted display. ⑶ Press “ENTER” to enter the selected item. ⑷ Under menu system, press “MENU” to back to previous menu. *The menu will automatically save and quit if it remains idle. 3.
3.5 DISPLAY submenu The DISPLAY submenu is to select the items to be displayed on screen when ‘DISPLAY” button is pressed. Revolve "ENTER" to turn on/off the items: INFO: Including Input format, aspect ratio, underscan/overscan, zoom status TITLE: User edited title MARKER SEL: Select the scale marker from 4:3, 13:9, 14:9, 15:9, 1.85:1, 2.35:1 and OFF SAFE AREA: Select the safe area scale from 80%, 85%, 90%, 95% and OFF. MARKER CLR: Select the color of markers from WHITE, RED, GREEN, BLUE, BLACK and GRAY.
4. TALLY Light Operation The front TALLY light can display 3 colors: RED, GREEN and YELLOW. The TALLY light controlling port is the DB-9 socket at the rear panel, and terminal description is as follows: Terminal Description 1 2 3 4 Y G R 5 6 7 8 9 GND The RED light is on when connecting the terminal “R” with “GND”, and goes out when disconnecting. The GREEN light is on when connecting the terminal “G” with “GND”, and goes out when disconnecting.
5. Specifications LCD Performance Size Display area Resolution Aspect ratio Brightness Contrast Color Viewing angle Video Format CVBS SMPTE-425M SMPTE-274M SDI SMPTE-RP211 SMPTE-296M SMPTE-125M ITU-R BT.656 HDMI General Working voltage Power consumption Working temperature Working humidity Storage temperature Storage humidity Net weight (w/o stand) 15.6 inches 344 194mm 1920 RGB 1080 16:9 (4:3 adjustable) 200cd m2 700:1 10-bit, 1.
7. Optional Accessories Model S-7005S S-7005A A-PG16 A-VS16 A-RK16 Description V-mount battery plate Gold mount battery plate Magnetic LCD protective organic glass Rotatable desktop stand with VESA installation 19-inch rack install bracket 7.1 Battery plate Installation 1. Take off the rub cover on the rear panel, see Fig. (1) 2. Insert the DC cable of S-7005S/A into the hole, and plug onto the power socket inside the hole, see Fig. (2) 3.
7.2 Protective organic glass The A-PG16 organic glass has left and right magnetic stripes and can be fixed on front of the LCD panel, to protect the LCD during transport or stock. 6 A-PG16 7.
7.4 19-inch rack install bracket Installation 1. Fix the brackets onto the left and right sides of S-1161H monitor, see Fig (1) and Fig (2); 2. Install the monitor with brackets onto the 19-inch rack; see Fig (3); 3. The installed monitor is as Fig.
8. Installation Dimension 8.1 The main body (in mm) 47 60 394 100 55 22 100 115 10 35 31 67 92 8.2 With desktop stand feet (in mm) 308 394 135 8.
