Manual

Marker Back: Normal, Semitransparent, Black
Normal: Normally display the outer area of scale marker
Semitransparent: half-tone display the outer area of scale marker
Black: Black display the outer area of scale marker
3.4 OSD submenu
The OSD submenu includes:
Menu Position: Center, right top, right bottom, left
top, left bottom
Menu timeout: 0 60s
Set a time (in seconds) in which the menu will
automatically quit if remains idle. Default: 30.
Language: Menu language selection
Source ID Display On/Off
Source ID Character CAM 1
Revolve "ENTER" button to select the letters, and press "ENTER" to input. Max 10 letters are
supported, the default is CAM1. There are 76 letters available, details are as below:
A Z a z 0 9
& ‘ * + - . / : ?
Input info Display On/Off
On turn on the OSD info display
Off turn off the OSD info display
3.5 System submenu
The system submenu includes:
Backlight: 0 100 value adjustment
F1 F4 Button: define Function Key F1, F2, F3
and F4, function includes:
Input Source Scan: On/Off
Switch on: when turn on the monitor, it will scan the signal input with the sequence: SDI1 SDI2
HDMI CVBS until the first recognized input and automatically display.
Tally R Brightness: Low, Medium, High
Tally G Brightness: Low, Medium, High
Reset: Yes/No
Select “YES” to recover all to factory settings expect Language setting.
SD Aspect Ratio Zebra
Scan B/R/G Only
Zoom Time Code
Mono CVBS
Freeze Frame HDMI
Button Lock SDI1
PIP SDI2
Focus Assist Undefined
Audio Bar