Manual

2. Panel Instruction
Front view
MENU Press to enter Menu
DISPLAY Display current settings
Press “Display” to display or shut off relevant status information
ZOOM: Press “ ZOOM” to switch on/off the zoom function.
SOURCE Press SOURCE to select SDI1 SDI2 HDMI CVBS signal input
User definable function keys
Press and hold F1/F2/F3/F4, it will display the current definitions of the 4 function keys.
ENTER/VOL Select and Apply
Under menu system, revolve “ENTER/VOL” to adjust settings and press to apply;
Out of menu system, revolve “ENTER/VOL” to adjust volume, and press “ENTER/VOL” to mute.
BRIGHT: Revolve “BRIGHT” to adjust brightness value from 0 100. Default: 50.
CONTRAST Revolve “CONTRAST” to adjust contrast value from 0 100. Default: 50.
SATURATION Revolve “SATURATION” to adjust saturation value from 0 100. Default: 50.
POWER Power on/off
Connect with power cable, press the “POWER” to switch on the monitor. Press again to switch off.
Disconnect with power cable or battery if the monitor will not be used for a period of time.
TALLY Light: Red, Green and Yellow 3-color TALLY indicator
PHONE 3.5mm earphone socket, for SDI/HDMI embedded audio and analog audio monitoring.