Instruction Manual

2. Panel Instruction
Front view
PHONE: Earphone jack, for SDI embedded audio, HDMI embedded audio and analog audio monitoring
POWER: Power on/off
Connect with power cable, press the “POWER” to switch on the monitor. Press again to switch off.
Disconnect with power cable if the monitor will not be used for a period of time.
CVBS: Press to switch the input signal to Composite video
HDMI: Press to switch the input signal to HDMI
SDI: Press to switch the input signal to SDI
OVERSCAN: Overscan / Underscan switch
MENU: Press to enter Menu
F1: User definable function key 1
F2: User definable function key 2
RATIO: 16:9 and 4:3 switch
ZOOM: Picture Zoom-in
Press “ZOOM” to switch ZOOM1: Canon DSLR scale zoom-in, and ZOOM2: pixel to pixel zoom-in.
DISPLAY: Display current settings
Press “Display” to display safety mark, title and the current input signal information
OK: Select and Apply
Under menu system, revolve “OK” to adjust settings and press to apply;
and out of menu system, directly revolve “OK” to adjust volume.
TALLY Light: Red and Green 2-color TALLY indicator