Owner manual

5. Optional Battery Mount
5.1 Battery mount choice
S-1051H monitor can use DV batteries by connecting with SWIT S-7004 snap-on mount. There’re following
types of S-7004 for choice:
Model Compatible battery type Recommended SWIT battery
S-7004F SONY L series NP-F770/970 S-8972, S-8970, S-8770
S-7004P Panasonic CGA series D54S/D28S S-8D62
S-7004J JVC BN-V428U S-8428
S-7004C Canon BP series BP-930/945 S-8945, S-8845
S-7004U SONY BP-U series U60/30 S-8U62
S-7004E Canon DSLR, LP-E6 S-8PE6
S-7004B Panasonic VW-VBG6 S-8BG6
S-7004V JVC BN-VF823 S-8823
5.2 Installation of S-7004 snap-on DV mount
S-7004 DV mount is snap-on type. Please follow the instructions:
(1) Please make sure the power terminals are clean and in well condition before use.
(2) Align the S-7004 slots to the bolts of the monitor rear panel, and press tightly in.
(3) Slide the S-7004 mount down to the bottom.
(4) Fix the S-7004 mount by provided screws on the top side.
(5) Mount the corresponding battery to S-7004 to power the monitor.
Terminal
Slot
Screw hole
Battery
release