Model: S-1051H 5" Portable On-camera HDSDI&HDMI LCD Monitor User Manual Please read this User Manual throughout before using.
Preface Congratulations on your purchase of this product. Please read this user manual carefully. 1 ． All internal technologies of this product are protected, including device, software and trademark. Reproduction in whole or in part without written permission is prohibited. 2 ． All brands and trademarks of SWIT Electronics Co., Ltd. are protected and other relative trademarks in this user manual are the property of their respective owners.
Maintenance Monitor 1. Please keep the signal terminals and the cooling vent away from knife-edge, metal or liquid in order to avoid short-circuit and damage. 2. Please don't try to disassemble any parts of the monitor by yourself, which would probably damage the monitor and do harm to human body, and it will cause the invalidation of product warranty. 3. Please don't touch the screen with your fingers, which would probably deface the screen. 4.
1. Features ◆ High resolution LCD Panel 5-inch, 16:9, 800×480 with wide viewing angle ◆ 3Gbps SDI support Accept 3G/HD/SD-SDI input ◆ Multi Input/Output Support SDI, HDMI, CVBS input and loop through output ◆ SDI embedded audio output Convert SDI embedded audio to analog and output via 3.5mm earphone jack. ◆ HDMI embedded audio output Convert HDMI embedded audio to analog and output via 3.5mm earphone jack. ◆ Underscan and Overscan Switch between underscan and overscan mode.
2. Panel Instruction Front view ⑴ POWER: Power on/off Connect with power cable or mount battery, press the “POWER” and the power indicator is turned on and after 10 seconds, the monitor will be switched on and get into normal working status. Press the “POWER” again, the indicator is turned off and monitor is switched off. Disconnect with power cable or take off the battery if the monitor will not be used for a period of time.
Rear view ⑴ DC 12V IN: Connect with DC12V power adapter. Please mind the polarity as: ⑵ PHONE: Earphone jack, for SDI embedded audio, HDMI embedded audio monitoring ⑶ CVBS-IN: Composite video input (BNC connector) ⑷ CVBS-LOOP: Composite video loop through output (BNC connector) ⑸ Battery mount install: Connect with SWIT S-7004 series snap-on DV mounts, See details in “Optional Battery Mount”.
3. Menu Operation ⑴ Press “MENU” and it will display menu system ⑵ Revolve “OK” to select an item. The selected item will be highlighted display. ⑶ Press “OK” to enter the selected item. ⑷ Under menu system, press “MENU” to back to previous menu. *The menu will automatically save and quit if it remains idle. 3.
3.4 TITLE submenu Revolve "OK" button to select the letters, and press "OK" to input. Select SPACE to input space and DEL to delete the left letter. Max 10 letters are supported. After setting, press "MENU", the system will save data to current user and quit menu. The menu will automatically save and quit if it remains idle. 3.5 DISPLAY submenu The DISPLAY submenu is to select the items to be displayed on screen when ‘DISPLAY” button is pressed.
5. Optional Battery Mount 5.1 Battery mount choice S-1051H monitor can use DV batteries by connecting with SWIT S-7004 snap-on mount.
6. Specifications LCD Performance Size Display area Resolution Aspect ratio Brightness Contrast Color Viewing angle Video Format CVBS SMPTE-425M SMPTE-274M SDI SMPTE-296M SMPTE-125M ITU-R BT.656 HDMI General Working voltage Power consumption Working temperature Working humidity Storage temperature Storage humidity Dimensions Net weight (main body) 5.0 inches 108.0×64.8mm 800×RGB×480 16:9/4:3 350cd/m2 500:1 16.77 million colors Horizontal: 140 Vertical: 120 ° ° ∕ NTSC PAL 1080p (60 / 59.
